Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Hurst, TX

Garage Door Hinge Replacement in Hurst, TX

Cracked or loose hinges replaced so panels stay aligned and quiet. Typical cost $100-$250.

When your door needs garage door hinge replacement, you want it done safely and right the first time. Typical jobs in Hurst, TX cost $100-$250, and you approve the price first. Cracked or loose hinges replaced so panels stay aligned and quiet.

When to call for garage door hinge replacement

  • Cracked hinges or hinge leaves pulling away from the panel
  • Panels that flex or separate as the door moves
  • Popping or clicking noises at the panel joints

What usually causes it

  • Years of flexing at the panel joints
  • Loose screws that let the hinge wear its holes
  • A door that's out of balance putting extra stress on the hinges

Safe checks before you call

  • Look for cracks around each hinge, especially in the middle panels.
  • Tighten loose hinge screws, but don't remove the bottom corner brackets.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

How we handle garage door hinge replacement

  1. Inspect every hinge and panel joint
  2. Replace cracked hinges with the correct numbered size
  3. Reinforce stripped screw holes
  4. Lubricate the hinge pivots
  5. Check the door's balance and alignment

Garage Door Hinge Replacement cost in Hurst, TX

$100-$250Typical range, parts & labor
under 1 hourTypical time on site

What moves the price:

  • Door size and weight (single or double, steel or wood)
  • Which parts need replacing and whether they are in stock
  • Spring type and cycle rating
  • Emergency or after-hours timing

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Local garage door hinge replacement for Hurst, TX

Humid air in Texas rusts cables, roller bearings and hinges, which makes the door noisy and heavy and eventually makes the opener strain.

Close to the coast, salt air speeds up corrosion. Galvanized or coated springs, nylon rollers and stainless hardware hold up better than bare steel.

Besides Hurst (ZIP codes 76053 and 76054), we handle garage door hinge replacement in Bedford (2.1 mi), Richland Hills (3.4 mi), North Richland Hills (3.5 mi) and Colleyville (4.1 mi). Call (833) 435-8883 to book a visit in Hurst.

Garage Door Hinge Replacement: frequently asked questions

How much does garage door hinge replacement cost in Hurst, TX?

Garage Door Hinge Replacement typically costs $100-$250 including parts and labor, and usually takes under 1 hour. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do garage door hinge replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is garage door hinge replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where Texas or Hurst requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my garage door?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the garage door is near the end of its life, replace it. A garage door typically lasts 15 to 30 years. If several panels are damaged, the door is rusted through or rotted, or parts are discontinued, replacing it is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Hurst, TX

Rolling Fire Door Inspection & Drop Testing

Annual drop testing and inspection of rolling fire doors.

Typical $150-$500

Marantec Smart Garage Door Opener Setup

Marantec is a German manufacturer of residential and commercial door openers.

Typical $100-$900

Hörmann Garage Door Panel Replacement

Hörmann is a German manufacturer of residential and commercial doors and openers with North American operations.

Typical $300-$900

CHI Overhead Doors Garage Door Installation

CHI Overhead Doors builds residential and commercial sectional doors in Arthur, Illinois, and sells them through independent dealers.

Typical $1,200-$4,500

Amarr Extension Spring Replacement

Amarr, an ASSA ABLOY Group brand, makes residential lines such as Classica, Heritage, Lucern and Oak Summit, as well as commercial doors.

Typical $150-$350

Richards-Wilcox Garage Door Roller Replacement

Worn steel or plastic rollers swapped for quiet, sealed nylon rollers.

Typical $150-$350

Wind-Rated Garage Doors

Hurricane-rated doors and reinforcement kits for high-wind and coastal areas.

Typical $1,800-$6,000

Chamberlain Smart Garage Door Opener Setup

Chamberlain is the retail line of The Chamberlain Group, sold at home centers. It uses the same Security+ 2.0 remote technology and myQ app as LiftMaster, so many accessories work with both brands.

Typical $100-$900

Genie Garage Door Opener Repair

Genie is the residential opener brand of the Overhead Door Corporation. Genie openers use Intellicode rolling-code remotes, Genie is one of the few brands still offering screw-drive openers, and newer models connect to the Aladdin Connect app.

Typical $125-$350

Garage Door Replacement

Old or damaged doors replaced with a new door, springs, tracks and hardware.

Typical $1,200-$5,000

Smart Garage Door Opener Setup

Wi-Fi openers and smart hubs set up so you can open, close and monitor from your phone.

Typical $100-$900

Craftsman Opener Circuit Board Replacement

Older Craftsman openers with model numbers starting with 139 were built by Chamberlain, so their remotes and parts often match Chamberlain and LiftMaster models from the same era.

Typical $175-$400

Garage door stuck, noisy or broken?

Talk to a garage door technician in Hurst, TX now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote